Radial Twin Iso
Bestell-Nr.: 100468
Lieferzeit ca. 14 Tage
Unser Shop richtet sich ausschließlich an Unternehmer. Die ausgewiesenen Preise sind daher Netto-Preise (ohne Umsatzsteuer) zzgl. Versandkosten* und gegebenfalls Nachnahme
Falls Sie ein Neukunde sind, können Sie sich ebenfalls über dieses
Formular bei uns neu anmelden.
Produktinformationen "Radial Twin Iso"
Dieser mit Jensen-Übertragern ausgestattete, kompakte 2-Kanal-Entkoppler für Signale mit Line-Pegeln wurde speziell für den Einsatz in Live-Umgebungen entworfen, in denen durch Masseschleifen verursachte Störgeräusche vermieden werden sollen. Der Twin-Iso ist ideal dazu geeignet, Submix-Pulte vom FOH-Hauptsystem, das häufig durch eine separate Stromversorgung gespeist wird, zu entkoppeln. Der Twin-Iso zeichnet sich durch Signalverarbeitung mit unglaublichen 20dB Headroom und einem vollständig schwebenden Schaltungsaufbau aus, wodurch echter Zweikanalbetrieb ermöglicht wird.
Equipped with the world's finest Jensen Audio Transformers, the Radial Twin-Iso is a no-excuse problem solver that provides exceptional audio performance while eliminating ground loops. It features two +4dB line-level floating channels with XLR input and output connectors for easy interfacing. Nickel laminated Jensen JT-11P1 isolation transformers and insulated XLRs provide 100% isolation. Jenen'sdo not introduce problems such as phase shift or group delay, which can cause bass to sound muddy and indistinct. This is of utmost importance when interfacing advanced line array systems where maintaining phase relationships are paramount to achieving the controlled dispersion pattern. Jensen Transformers are legendary for their warm Bessel curve and in their ability to handle transients without overload or ringing.
As a unity-gain device, the Radial Twin-Iso boasts an amazing 10Hz to 40kHz response for natural uncolored sound for ‘mirror-like audio picture quality'. To allow long cable runs with minimal loading, the Twin-Iso features balanced, 10k-Ohm input impedance. This assures optimum performance when the Radial Twin-Iso is positioned near the input of the receiving device.
Inside the Twin-Iso
1. Isolated XLR connectors to eliminate chassis ground potential.
2. Pair of Jensen audio transformers provide 100% isolation to eliminate hum and noise causing ground loops.
3. Military spec PC board with full surface ground plane to reduce susceptibility to RF noise.
4. High grade switches - ensure long life and reliable performance.
5. 14-gauge steel welded I-beam construction makes it virtually impossible to torque the PC board.
Twin-Iso Input and Output Panels
6. 'LIFT' - Ground 'Push to lift' switch lifts pin-1 for both 'INPUT-1' and 'INPUT-2'.
7. 'INPUT-1' - 600 Ohm balanced input, female XLR connector, AES standard with pin-1 ground and pin-2 hot.
8. 'INPUT-2' - 600 Ohm balanced input, female XLR connector, AES standard with pin-1 ground and pin-2 hot.
9. Book-end design creates a protective zone around the switches & connectors - indestructible 14-gauge steel construction.
10. Full no-slip rubber bottom pad provides mechanical isolation, electrical insulation and prevents unit from sliding around.
11. Heavy-duty baked enamel finish for excellent durability and great looks for years!
12. 'OUTPUT-2' - Isolated 600 Ohm balanced male XLR output connector; AES standard with pin-1 ground and pin-2 hot.
13. '180°' - Polarity Reverse phase reverse switch for 'OUTPUT-2'.
14. 'OUTPUT-1' - Isolated 600 Ohm balanced male XLR output connector; AES standard with pin-1 ground and pin-2 hot.
15. '180°' - Polarity Reverse phase reverse switch for 'OUTPUT-1'.
Input impedance: 716 Ohms
Insertion loss: 1.6dB (w/600 Ohm load)
Voltage gain: -1.6dB
Deviation from linear phase: +.03/-0° (20 Hz to 20 kHz, 0 dBu)
Frequency response: 10Hz to 80kHz
Distortion (THD): <0.001% (1kHz, +4 dBu) < 0.025% (20kHz, +4 dBu)
Maximum signal handling: +20.5dBu (20Hz, 1% THD)
Common-mode rejection ratio (CMRR): 94dB (60Hz)
Output impedance: 116 Ohms
Size (H x W x D): 2" x 3.25" x 5"
Weight: 1.95 lbs / .9 kg
Construction: 14-gauge steel chassis & shell, baked enamel finish
Kundenbewertungen für "Radial Twin Iso"
Bewertung schreiben