Radial JS3
Bestell-Nr.: 100256
Lieferzeit ca. 14 Tage
Unser Shop richtet sich ausschließlich an Unternehmer. Die ausgewiesenen Preise sind daher Netto-Preise (ohne Umsatzsteuer) zzgl. Versandkosten* und gegebenfalls Nachnahme
Falls Sie ein Neukunde sind, können Sie sich ebenfalls über dieses
Formular bei uns neu anmelden.
Produktinformationen "Radial JS3"
Leistungsfähige Mikrofonsplitter, wahlweise mit einfacher oder doppelter Ausgangsentkopplung. Dank vollständig passiver Signalwege und die Ausstattung mit Jensen-Übertragern erzielen diese Mikrofonsplitter eine unerreicht hohe Audioqualität, ohne dabei Rauschen oder Störgeräusche in den Signalweg einzubringen. Bis zu acht Einheiten können mit Hilfe des J-Rak für die Rackmontage kombiniert werden, wodurch der JS2 und der JS3 ideal für professionelle Mehrkanalaufnahmen und die Signalaufteilung bei Livekonzerten geeignet sind.
High-quality Jensen transformer equipped mic splitter featuring XLR mic input, an XLR direct through-put to the main mixing point, 48V phantom DC feed, and an isolated output for the monitor mix position. A 4th thru-put is provided that may be ground lifted.
The Radial JS-3 employs a Jensen JT-MBD mic bridging transformer. The JT-MBD features a 1:1:1 with dual secondary windings to allow dual Isolated outputs. This allows the JS-3 to be equipped with a main direct-out for FOH, and two Isolated outs for monitor mix and broadcast feed.
Normally, the XLR-F input would be from a microphone. A 30dB pad is also provided when using the JS-2 with line level devices. The direct output is used to drive the front-of-house (FOH) mixing console and is direct coupled to allow 48V DC Phantom return path to the microphone. A second auxiliary output is designed to drive a recording device or a transformer Isolated broadcast split. This output is equipped with a ground lift to minimize ground loops and to cut-off 48V DC from phantom powering. The Isolated output is bridged using a Jensen JT-MBC transformer. The JT-MBC is a 1:1,600-Ohm transformer that is optimized for concert touring where battling noise is relentless. It features exceptional common mode noise rejection with up to -100dB at 60Hz.
Both the Radial JS-2 and JS-3 employ electrically Isolated XLR inputs and outputs and feature a stand-alone housing with 14-gauge, I-Beam steel frame with baked enamel finish and an innovative bookend cover. These combine to ensure the JS is never exposed to outside stress that could cause cold solder joints while providing the switches and jacks with maximum protection against damage. For more permanent installations, as many as eight of the JS-2 and JS-3 may be 19" rack-mounted using the 2RU Radial J-Rack shelf. This is accomplished by merely removing the bookend covers from the JS-2/3s and inserting these into a similar more compact housing. These are, in turn, mounted in the J-Rak with choice of front or rear positioning of the inputs
Kundenbewertungen für "Radial JS3"
Bewertung schreiben